티스토리 뷰
728x90
1. 파워 쉘 코드 작성
2. 코드내 경로 수정
c:\>xxxxx.ps1 -vsVersion 2015 -buildType Release -arch x64
c:\>xxxxx.ps1 -vsVersion 2015 -buildType Release -arch x86
param(
[string]$vsVersion,
[string]$buildType = "Release",
[string]$arch = "x64"
)
# Confirm input
$validVsVersions = @("2015", "2017", "2019", "2022")
$validBuildTypes = @("Debug", "Release", "Release-MD", "MinSizeRel")
$validArchs = @("x64", "Win32")
if ($vsVersion -notin $validVsVersions -or $buildType -notin $validBuildTypes -or $arch -notin $validArchs) {
Write-Host "Invalid input. Please enter the correct Visual Studio version, build type, and architecture."
exit
}
# Setup paths
$sourcePath = "G:\ThirdParty\Source\AbSeil\2022_06_23" #2015 2017
#$sourcePath = "G:\ThirdParty\Source\AbSeil\2024_01_16"
$buildDir = "install\build_${vsVersion}_${buildType}_${arch}"
$buildPath = Join-Path $sourcePath "build"
$installPath = Join-Path $sourcePath $buildDir
Write-Host "====================================================================" -ForegroundColor Cyan
Write-Host "=== You have selected the following configuration:"
Write-Host "=== [opensslPath] $opensslPath"
Write-Host "=== [sourcePath] $sourcePath"
Write-Host "=== [buildDir] $buildDir"
Write-Host "=== [buildPath] $buildPath"
Write-Host "=== [installPath] $installPath"
Write-Host "====================================================================" -ForegroundColor Cyan
# Create build and install directories
New-Item -Path $buildPath -ItemType Directory -Force
New-Item -Path $installPath -ItemType Directory -Force
# Change to build directory
Set-Location -Path $buildPath
# Visual Studio generator 및 Platform Toolset 설정
$toolset = ""
if ($vsVersion -eq "2022") {
$generator = "`"Visual Studio 17 2022`""
} elseif ($vsVersion -eq "2019") {
$generator = "`"Visual Studio 16 2019`""
} elseif ($vsVersion -eq "2017") {
$generator = "`"Visual Studio 15 2017`""
$toolset = "-T v141"
} else { # 2015
$generator = "`"Visual Studio 14 2015`""
$toolset = "-T v140"
}
$archType
# 아키텍처에 따른 추가 설정
if ($arch -eq "x64") {
$archType = "x64"
} else {
$archType = "Win32"
}
if( $validBuildTypes -eq "Debug" ){
$cmakeArgs = @(
"-G",$generator,$toolset,"-A", $arch,"..",
"-DCMAKE_BUILD_TYPE=$buildType",
"-DCMAKE_INSTALL_PREFIX=$installPath"
"-DBUILD_SHARED_LIBS=OFF"
)
}elseif($validBuildTypes -eq "Release"){
$cmakeArgs = @(
"-G",$generator,$toolset,"-A", $arch, "..",
"-DCMAKE_BUILD_TYPE=$buildType",
"-DCMAKE_INSTALL_PREFIX=$installPath"
"-DBUILD_SHARED_LIBS=OFF"
)
}else{
$cmakeArgs = @(
"-G",$generator,$toolset,"-A", $arch,"..",
"-DCMAKE_BUILD_TYPE=$buildType",
"-DCMAKE_INSTALL_PREFIX=$installPath")
}
# CMAKE_CXX_FLAGS 설정
$cmakeCXXFlagsDebug = "/MTd"
$cmakeCXXFlagsRelease = "/MT"
$cmakeCXXFlagsReleaseMD = "/MD"
$cmakeCXXFlagsMinSizeRel = "/MD"
# 사용자에게 현재 설정을 보여주고 확인 받음
Write-Host "====================================================================" -ForegroundColor Cyan
Write-Host "=== You have selected the following configuration:"
Write-Host "=== INFORMATION" -ForegroundColor Yellow
Write-Host "=== [VS Version]: $vsVersion" -ForegroundColor Green
Write-Host "=== [BUILD Type]: $buildType" -ForegroundColor Green
Write-Host "=== [ARCH]: $arch" -ForegroundColor Green
Write-Host "=== [Source Path]: $sourcePath" -ForegroundColor Green
Write-Host "=== [cmakeArgs]: $cmakeArgs" -ForegroundColor Green
Write-Host "====================================================================" -ForegroundColor Cyan
$response = Read-Host "Is this information correct? (y/n)"
if ($response -ne 'y') {
Write-Host "Configuration aborted by user." -ForegroundColor Red
exit
}
# Run CMake to configure
$cmakeArgs += "-DCMAKE_CXX_FLAGS_DEBUG=$cmakeCXXFlagsDebug"
$cmakeArgs += "-DCMAKE_CXX_FLAGS_RELEASE=$cmakeCXXFlagsRelease"
$cmakeArgs += "-DCMAKE_CXX_FLAGS_MINSIZEREL=$cmakeCXXFlagsMinSizeRel"
$cmakeArgs += "-DCMAKE_CXX_FLAGS_RELWITHDEBINFO=$cmakeCXXFlagsRelease"
if ($buildType -eq "Release-MD") {
$cmakeArgs += "-DCMAKE_CXX_FLAGS=$cmakeCXXFlagsReleaseMD"
}
# Run CMake to configure
& cmake $cmakeArgs
& "G:\ThirdParty\Source\AbSeil\ChangeVsProjectValue.ps1"
# Build and install
& cmake --build . --config $buildType
& cmake --build . --target install --config $buildType
# Return to original path
Set-Location -Path $sourcePath
# Cleanup: Remove build directory
Remove-Item -Path $buildPath -Recurse -Force
Write-Host "Build and installation completed and cleaned up for Visual Studio $vsVersion, $buildType, $arch, installed at $installPath" -ForegroundColor Green
반응형
댓글
공지사항
최근에 올라온 글
최근에 달린 댓글
- Total
- Today
- Yesterday
링크
TAG
- 블루버블
- C
- 외돌개
- 성산블루버블
- DLL
- script
- 서귀포블루버블
- 현포다이브
- PowerShell
- C# 고급 기술
- 네트워크 정보
- OpenSource
- 블루버블다이브팀
- Effective c++
- Build
- Linux
- 제주도
- C++
- 블루버블다이빙팀
- CMake
- C#
- 서귀포
- 패턴
- 암호화
- Windows
- 스쿠버 다이빙
- 울릉도
- 스쿠버다이빙
- C#.NET
- effective
일 | 월 | 화 | 수 | 목 | 금 | 토 |
---|---|---|---|---|---|---|
1 | 2 | |||||
3 | 4 | 5 | 6 | 7 | 8 | 9 |
10 | 11 | 12 | 13 | 14 | 15 | 16 |
17 | 18 | 19 | 20 | 21 | 22 | 23 |
24 | 25 | 26 | 27 | 28 | 29 | 30 |
글 보관함
250x250